Avaya P330-ML-ML manual P330-ML-2show powerinline image version, Show ppp authentication

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

image version of P333T-PWR switches in the stack or a specific switch.

The syntax of this command is:

show powerinline image version [<module-number>]

If you do not specify a number, then the software version for all the P333T-PWR switches is shown.

module-	Number of the module for which you want to display the
number	current powerline image version
Example:

P330-ML-2>show powerinline image version

Mod	Image Version
---	-------------
1	1.2.9
4	1.2.9
5	1.2.9

Example:

P330-ML-2>show powerinline 3

Mod	Image	Version
---	-------------
3	1.2.9

show ppp authentication

User level: user, privileged, supervisor

Use the show ppp authentication command to display the authentication method used for PPP sessions.

The syntax for this command is:

show ppp authentication

Example:

P330-N>show ppp authentication

PPPAuthentication Parameters:

------------------------------

Incoming: CHAP

172 Avaya P330-ML Reference Guide