Chapter 2 Avaya P330-ML Layer 2 CLI Commands

set port dot1x supp-timeout

User level: supervisor

Use the set port dot1x supp-timeoutcommand to set the time for the port to wait for a reply from the Authentication Server before the session is terminated.

The syntax for this command is:

set port dot1x supp-timeout <module/port> <seconds>

module/

Module and port number (or range of ports)

port

 

seconds

Number of seconds – 0 to 65535

Example:

 

P330-1(super)#set port dot1x supp-timeout 1/2 400

set port dot1x tx-period

User level: supervisor

Use the set port dot1x tx-periodcommand to set the time interval between attempts to access the Authenticated Station.

The syntax for this command is:

set port dot1x tx-period <module/port> <seconds>

module/

Module and port number (or range of ports)

port

 

seconds

Number of seconds — 0-65535

Example:

 

P330-1(super)#set port dot1x quiet-period 1/2 5000

set port duplex

User level: privileged, supervisor.

Use the set port duplex command to configure the duplex type of an Ethernet or Fast Ethernet port or range of ports. You can configure Ethernet and Fast Ethernet interfaces to either full duplex or half duplex.

90

Avaya P330-ML Reference Guide

Page 104
Image 104
Avaya P330-ML-ML manual Set port dot1x supp-timeout, P330-1super#set port dot1x supp-timeout 1/2, Set port dot1x tx-period