Chapter 2 Avaya P330-ML Layer 2 CLI Commands

The stack is reset once the command has been executed. You should not load the stack with traffic during this test.

Please follow the instruction shown on the CLI screen, during the various stages of this test.

The syntax for this command is:

stack health

Example:

P330-N>stack health

TThis operation will eventually result in a Stack reset. - do you want to continue (Y/N)? y

Start testing stack health....

This test will take a few minutes!!

The stack health test was completed successfully

sync time

User level: privileged, supervisor.

Use the sync time command to synchronize the time used by all modules in the switch.

The syntax for this command is:

sync time

Example:

P330-N#sync time

Time has been distributed.

tech

User level: supervisor

Use the tech command to enter tech mode. This command is reserved for service personnel use only.

telnet

User level: user, privileged, supervisor

Use the telnet command to open a Telnet session to a remote host.

208

Avaya P330-ML Reference Guide

Page 222
Image 222
Avaya P330-ML-ML manual P330-Nstack health, Sync time, P330-N#sync time