Avaya P330-ML-ML P330-N#set allowed managers ip add, Set arp-aging-interval, Set arp-tx-interval

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

Example:

P330-N#set allowed managers ip add 149.49.32.134

Ip was added to the table

set arp-aging-interval

User level: privileged, supervisor.

Use the set arp-aging interval command to set the ARP table aging interval for entries in the agent Layer 2 ARP table.

The entry is deleted at the end of every aging interval. The default value is 10 minutes.

The syntax for this command is:

set arp-aging-interval <value>

value	The number representing the interval, from 0-10 minutes. 0 -
	arp-aging interval is 20 minutes.
Example:

P330-N#set arp-aging-interval 10

ARP table aging interval was set to 10 minutes.

set arp-tx-interval

User level: privileged, supervisor.

Use the set arp-tx-intervalcommand to set the keep-alive frames sending interval. The keep-alive frames in ARP packets for the P330-ML agent are used to ensure connectivity with the P330-ML agent is always achieved.

The syntax for this command is:

set arp-tx-interval <value>

value	The interval in seconds. (0-3600)
	0 disables the transmission of the keep-alive frames.
Example:

P330-N#set arp-tx-interval 15

ARP tx interval was set to 15 seconds.

60 Avaya P330-ML Reference Guide