Avaya P330-ML-ML manual Show queuing scheme, P330-Nshow queuing scheme, Show radius authentication

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

show queuing scheme

User level: user, privileged, supervisor

This command is available on P330-ML-ML switches only

Use the show queuing scheme command to display the current queuing scheme settings.

If this command is to be implemented on a P330-ML-ML switch other than the stack master, a session should be opened to the relevant switch.

The syntax for this command is:

show queuing scheme

Example:

P330-N>show queuing scheme

Module Queuing Scheme

------ --------------

1Default

2Wrr 10:1

show radius authentication

User level: user, privileged, supervisor

Use the show radius authentication command to display all RADIUS authentication configurations.

The syntax for this command is:

show radius authentication

Example:
P330-N>show radius authentication
RADIUS authentication	parameters:
---------------------------------
Mode:	Enabled
Primary-server:	192.168.42.252
Secondary-server:	192.168.48.134
Retry-number:	4
Retry-time:	5
UDP-port:	1645
Shared-secret:	sodot

Avaya P330-ML Reference Guide 175