Avaya P330-ML-ML manual Show interface, P330-Nshow interface, Show intermodule port redundancy

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

show interface

User level: user, privileged, supervisor

Use the show interface command to display information on network interfaces.

The syntax for this command is:

show interface

Example:

P330-N>show interface

Interface Name	Status	VLAN	IP address	Netmask
----------------	--------------	----	---------------	---------------
inband	disabled	1	135.64.200.105	255.255.255.0
ppp	disabled	N/A	0.0.0.0	0.0.0.0

show intermodule port redundancy

User level: user, privileged, supervisor

Use the show intermodule redundancy command to display the intermodule rport edundancy entry defined for the stack.

The syntax for this command is:

show intermodule port redundancy

Example:

P330-N>show intermodule port redundancy

Primary-Port	: 1/1
Primary-Port status	: Disable
Secondary-Port	: 1/2
Secondary-Port status	: Disable

show internal buffering

User level: user, privileged, supervisor

Use the show internal buffering command to display the size options (Maximum, Minimum, or Medium) of the Receive (Rx) buffer allocated to each port of the specified switch.

Internal buffering for the P330-ML-ML switches will always have the value Not supported. This command is used to display the internal buffering status for the other P330-ML switches in the stack

138 Avaya P330-ML Reference Guide