Chapter 3 Avaya
area id | Area ID. This parameter exists for compatibility with |
| P550. |
Example: |
|
0.0.255.255 area 0.0.0.0
passive-interface
User level: privileged, supervisor.
Use the passive interface command to allow interfaces to be flooded into the OSPF domain as OSPF routes and not external routes.
An interface becomes passive only if you use the network command to enable OSPF to run on the interface.
The syntax for this command is:
Example:
Router-N# passive-interface FastEthernet 1.10
redistribute
User level: privileged, supervisor.
Use the redistribute command to redistribute routing information from other protocols into OSPF.
Use the no redistribute command disables redistribution by OSPF.
The syntax for this command is:
[no] redistribute <protocol>
protocol | • | static |
| • | conneted |
| • | RIP |
294 | Avaya |
