Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 17
Example:
copy running-config scp
User level: supervisor
Use the copy running-config scp command to upload the current
switch-level parameters from the current NVRAM running configuration into a file
via SCP.
The syntax for this command is:
copy running-config scp <filename> <ip> <mod_num>
P330-N# copy module-config tftp c:\config\switch1.cfg 192.168.49.10 5
Beginning upload operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'show tftp upload status' command
********************************************************************
* If you are currently running the P330-ML Device Manager
application,*
* it is recommended to exit from it before performing configuration*
* download operations. *
********************************************************************
filename The file name (full path)
ip The IP address of the SCP server
mod-num The switch number