Avaya P330-ML-ML manual Chapter Avaya P330-ML Layer 3 CLI Commands

	Chapter 3	Avaya P330-ML Layer 3 CLI Commands
action	<action> = permit deny deny-and-notify fwd0 fwd1 - fwd7
	• permit: do nothing, let the packet pass:

• deny: drop the packet

• deny-and-notify: drop the packet and send an SNMP trap

• fwd0, fwd1fwd7: Set the frame COS field to 0,7

Example:

Router-N(configure)#ip access-list-dscp operation 101 0-63 permit

Router-N(configure)#ip access-list-dscp operation 101 62 fwd5

ip access-list-dscp trust

User level: privileged, supervisor.

Use the ip access-list-dscp trust command to decide which original frame fields influence the selection of packet priority.

This command does not apply to the P333R.

The syntax for this command is:

ip access-list-dscp trust <policy-list-number> {untrustedtrust-cos trust-dscp}

policy-list-	A valid id number for a policy list currently defined for the module
number	(100 - 149)
untrusted	Forward the packet with priority 0
trust-cos	Forward the packet with its original 802.1p priority (default)
trust-dscp	Forward the packet with the maximum priority between 802.1p and
	the priority obtained from the DSCP-CoS mapping table

Avaya P330-ML Reference Guide 231