Chapter 2 Avaya P330-ML Layer 2 CLI Commands

show ppp baud-rate

User level: user, privileged, supervisor

Use the show ppp baud-ratecommand to display the ppp baud-rate.

The syntax for this command is:

show ppp baud-rate

Example:

P330-N>show ppp baud-rate

PPP baud rate is 38400

show ppp configuration

User level: user, privileged, supervisor

Use the show ppp configuration command to display the ppp configuration.

The syntax for this command is:

show ppp configuration

Example:

P330-N>show ppp configuration

PPP baud rate is 38400

PPPincoming timeout is 15 minutes PPP Authentication Parameters:

------------------------------

Incoming: None

show ppp incoming timeout

User level: user, privileged, supervisor

Use this show ppp incoming timeout command to display the amount of time in minutes that a PPP session can remain idle before being automatically disconnected.

The syntax for this command is:

show ppp incoming timeout

Avaya P330-ML Reference Guide

173

Page 187
Image 187
Avaya P330-ML-ML manual Show ppp baud-rate, P330-Nshow ppp baud-rate, Show ppp configuration, P330-Nshow ppp configuration