Chapter 2 Avaya P330-ML Layer 2 CLI Commands
reset stack
User level: privileged, supervisor.
Use the reset stack command to perform a hardware reset of the entire stack.
The syntax for this command is:
reset stack
reset wan
User level: user, privileged, supervisor
Use the reset wan command to perform a software reset in the X330 WAN Access Router Module.
The syntax for this command is:
reset wan
To reset a WAN module residing on switch 2:
module | Optional - the module number where the WAN module to be |
| reset resides. |
Optional - boot the WAN module from |
retstatus
User level: supervisor
Use the retstatus to display the return status of the previously executed command.
The syntax for this command is:
retstatus
Example:
P330-N# retstatus
Succeeded
Avaya | 55 |
