Avaya P330-ML-ML manual Show port trap, P330-Nshow port trap 4/1, Show port vlan-binding-mode

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

show port trap

User level: user, privileged, supervisor

Use the show port trap command to display information on SNMP generic link up/down traps sent for a specific port.

The syntax for this command is:

show port trap [<module>[/<port>]]

module	Number of the switches. If you do not specify a number, the
(Optional)	ports on all the switches are shown.
port	Number of the port on the switch. If you do not specify a
(Optional)	number, all the ports on the switch are shown.
	You can also specify a range of ports separated by a dash, for
	example, 4/5-13 for ports 5 to 13 on switch 4.
Example:

P330-N>show port trap 4/1

Port 4/1 up/down trap is disabled

show port vlan-binding-mode

User level: user, privileged, supervisor

Use the show port-vlan-bindingcommand to display port vlan binding mode information.

The syntax for this command is:

show port vlan-binding-mode [module[/port]]

module	Number of the switch. If you do not specify a number, the ports
	on all the switches are shown.
port	Number of the port on the switch. If you do not specify a
(Optional)	number, all the ports on the switch are shown.
	You can also specify a range of ports separated by a dash, for
	example, 4/5-13 for ports 5 to 13 on switch 4.

Avaya P330-ML Reference Guide 169