Avaya P330-ML-ML manual Show device-mode, Router-Nshow device mode

Chapter 3 Avaya P330-ML Layer 3 CLI Commands

show device-mode

User level: user, privileged, supervisor

This command does not apply to the P333R-LB which is always in “Load Balancing” mode.

Use the show device-modecommand to show the current switch operating mode. Possible modes are Router or Switch.

The syntax for this command is:

show device-mode

Example:

Router-N>show device mode

Device mode is router

show download status

User level: user, privileged, supervisor

This command applies the P330-ML-ML switches only.

Use the show download status command to display a summary of the last software download operation.

The syntax for this command is:

show download status [slot]

Example:

P330-N>show download status 1

Module #1
===========
Module	: 1
Source file	: c:\session4.txt
Destination file	: module-config
Host	: 149.49.75.100
Running state	: Idle
Failure display	: SCP - Server refused
Last warning	: No-warning
Bytes Downloaded	: 0

show erase status

User level: user, privileged, supervisor

Use the show erase status command to view the status of the erase

248 Avaya P330-ML Reference Guide