Avaya P330-ML-ML manual No snmp-server host

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

no snmp-server host

User level: supervisor

Use the no snmp-server host command to either delete the host from the trap recipients list or, if notifications types are specified in the command, disable the specified notifications for the host.

The syntax for this command is:

no snmp-server host <host-addr> [<notification-type-list>]

host-addrSpecifies the address (or host name) of the notification recipient agent. The maximum length is 32 bytes.

notification List of notification types. Each types combines related

-type-listnotifications. You can disable notification generations on a per

(Optional) group basis. For example, the swRedundancy type groups new and delete software redundancy notifications.

If no notification-type-list is specified, the default, all, is used.

•all/* – All traps

•generic – Generic traps

•config – Config change notifications

•eth-port-faults– Ethernet port fault notifications

•sw-redundancy– Software redundancy notifications

•temperature – Temperature warning notifications

•cam-change– Changes in CAM notifications

•l3-faults– Layer 3 faults, including duplicate IP and VLAN violations

•lag-event– Link aggregation faults and configuration changes

•policy – Changes in policy notifications (for L3 devices)

•link-down-faults– ITC proprietary link down notifications

•supply – Power supply notifications (main and backup)

•fan – FAN faults notifications (main and backup)

•cascade – Cascade connection fault notifications.

Note that the list of notification names is proprietary to ITC.

Avaya P330-ML Reference Guide 49