Avaya P330-ML-ML manual Router-Nconfigure#ip netmask-format bitcount decimal, Ip ospf router-id

Chapter 3 Avaya P330-ML Layer 3 CLI Commands

a dotted decimal.

The syntax for this command is:

[no] ip netmask-format <mask-format>

The possible mask formats are:

bitcount	Addresses are followed by a slash and the total number of bits
	in the netmask. For example 17
decimal	The network masks are in dotted decimal notation. For
	example, 255.255.255.0.
hexadecimal	The network masks are in hexadecimal format as indicated by
	the leading 0X. For example, 0XFFFFFF00.

Example:

To display netmasks in decimal format:

Router-N(configure)#ip netmask-format bitcount decimal

Done!

ip ospf router-id

User level: privileged, supervisor.

Use the ip ospf router-idcommand to configure the router identity.

Use the no ip ospf router-idcommand to return the router identity to its default (the lowest existing IP interface).

The syntax for this command is:

[no] ip ospf router-id <router id>

router-id The IP address of the router.

236 Avaya P330-ML Reference Guide