Chapter 3 Avaya P330-ML Layer 3 CLI Commands

Example:

Router-N(configure-if:marketing) # ip rip default-route-

mode talk listen

Done!

ip rip poison-reverse

User level: privileged, supervisor.

You can only access this command in interface mode.

Type interface [name] at the command prompt to enter interface mode if necessary.

Use the ip rip poison-reversecommand to enable split-horizon with poison-reverse on an interface.

Use the no ip poison-reversecommand to disable the poison-reverse mechanism.

The split-horizon technique prevents information about routes from exiting the router interface through which the information was received. This prevents routing loops.

Poison reverse updates explicitly indicate that a network or subnet is unreachable rather than implying they are not reachable. Poison reverse updates are sent to defeat large routing loops.

The syntax for this command is:

[no] ip rip poison-reverse

Example:

Router-N(configure-if:marketing) # ip rip poison-reverseDone!

ip rip rip-version

User level: privileged, supervisor.

Use the ip rip rip-versioncommand to specify the RIP version running on the interface basis.

The syntax for this command is:

ip rip rip-version <version>

Avaya P330-ML Reference Guide

283

Page 299
Image 299
Avaya P330-ML-ML manual Mode talk listen, Ip rip poison-reverse, Ip rip rip-version