Pager Call
This feature allows you to alert your pager when the unit records an incoming message. You can retrieve the message from a touch tone telephone (p. 64).
First store the pager number, then set the unit to call the pager.
•Consult your pager company to check whether the service alerts your pager automatically or via an operator. If an operator is used, this feature cannot be used.
Make sure that the unit is in the standby mode initially.
Storing a Pager Number
1 Press (FUNCTION/EDIT).
2 | Press Ö or Ñ repeatedly until the arrow |
points to “Program”. | |
3 | Press á (Yes key). |
4 | Press Ö or Ñ repeatedly until the arrow |
points to “TAD program”. | |
5 | Press á (Yes key). |
•“P” is displayed on the base unit. | |
6 | Press (#) . |
HSave directory Ringer volume
GF H=Yes
HProgram
GF H=Yes
HLCD contrast Set recall
GF H=Yes
HTAD program
GF H=Yes
Answering system setting
7 | #Enter your pager number, and press (REDIAL/PAUSE) twice.* |
Enter the access code, if required by your pager company, and |
press (REDIAL/PAUSE) twice again.*
$Enter the call back number to be displayed on the pager (the telephone number where your unit is connected).
%Press (#) if required by your pager company.
•The entered number is displayed on the base unit.
•If you misdial, press Ü and start again from step 5.
•You can enter a total of 48 digits.
62