Recharge | Panasonic KX-TC1230NZW, KX-TC1230ALW manual

Recharge

Recharge the battery when:
—“Recharge” is displayed on the handset,					Recharge
—“				” ﬂashes on the display, or
—“				” ﬂashes on the display, or

—the handset beeps intermittently while it is in use.

•If you DO NOT recharge the handset battery for more than 30 minutes, the

display will keep indicating “Recharge” and/or “ ” will continue to ﬂash.

•To fully recharge the battery, the handset should be left on the base unit for 10 hours.

Battery information

After your Panasonic battery is fully charged (p. 14):

Operation	Operating time

While in use (TALK)	Up to about 6 hours

While not in use (Standby)	Up to about 20 days

•The battery operating time may be shortened depending on usage conditions, such as viewing the Caller ID Caller List or directory list, and ambient temperature.

•Clean the handset and the base unit charge contacts with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the battery may not charge properly.

•If the battery is fully charged, you do not have to place the handset on the base

unit until “Recharge” is displayed and/or “ ” ﬂashes. This will maximize the battery life.

•The battery cannot be overcharged.

Preparation

Standby mode (While the handset is off the base unit)

The handset goes into the standby mode after you ﬁnish using the handset (making/answering a call, viewing the Caller List or directory list etc.). The display is blank, but the handset can receive calls. The battery operating time is conserved in this mode.

15

Image 15

Panasonic KX-TC1230NZW, KX-TC1230ALW Recharge, Battery information, After your Panasonic battery is fully charged p

Contents

Operating Instructions Charge the battery for about 10 hours before initial use Accessories included Before Initial UseFor your future reference Battery Charge For Best PerformanceBase Unit Location/Noise Contents Transferring a Call Using the Intercom Setting the Unit to Call a PagerCall Waiting and Caller ID Compatible For Australia only Base unit Location of Controls SKIP/FF First Forward Button p IndicatorVolume Buttons , p , 31 Record Button p 33, 34 Button 55, 56, 63 HandsetAntenna Button p , 25 Handset display Displays Displays Preparation Base unit display Connections Settings Fully charged Medium Low ﬂashing Needs to be recharged Installing the Battery in the HandsetBattery strength Display prompt Battery strength Recharge Battery informationAfter your Panasonic battery is fully charged p Standby mode While the handset is off the base unit Time and Date Adjustment Make sure the unit is in the standby mode initiallyYou can select AM/PM or 24-hour clock by programming To check the time and date For Caller ID service users p Programmable Functions To select the recall time pDuring programming Press á Yes key Setting the Auto Talk FeaturePress Ö or Ñ repeatedly until the arrow Points to Program To turn the ringer ON, press Ñ or Ö Selecting the Ringer VolumeWith the handset With the base unit Press Ö or Ñ to select the desired Setting the LCD ContrastWhile the arrow points to LCD Contrast, press á Yes key To store your area code Storing Your Area Code Preparing the Answering System Greeting MessageTo record a greeting message Pre-recorded greeting message Flash Memory Message BackupGreeting message sample To erase the recorded greeting message To store a pager number, press # Pages 62 To select the caller’s recording time , press Selecting the Caller’s Recording Time Points to TAD programPress Toll saver when set to Auto Selecting the Number of RingsPress 0, or 2 to 4 to set the number of rings To redial the last number dialled on the handset Making CallsWith the Handset If noise interferes with the conversation Backlit handset keypad To adjust the receiver volume while talkingTo dial after conﬁrming the entered number To redial after conﬁrming the last number dialled With the Base Unit Digital Duplex Speakerphone Making Calls To release the hold To adjust the speaker volume 8 levels while talkingTo redial the last number dialled on the base unit To put a call on hold Useful information Simultaneous Keypad Dialling Talk into the MIC Answering CallsAuto Talk If the handset is off the base unit, press Talk Caller ID Service How caller information is displayed when a call is receivedPrivate name display To check the number of new calls While the handset is on the base unitWhile the handset is off the base unit Viewing the Caller List Using the Caller List Display meaning Ex. When you search from the most recent callTo return to the previous caller To exit the Caller List Calling Back from the Caller List 0355566677 Editing the Caller’s Phone Number Storing Caller List Information in the Directory When the caller’s name is not displayed in the Caller List To erase a speciﬁc caller from the Caller List Erasing Caller List Information To erase all entries in the Caller List To erase a stored number Speed DiallerStoring Phone Numbers in Memory Dialling a Stored Number Storing Names and Numbers in the Directory Using the Directory Dialling buttons p Enter a name, up to 15 characters usingWhile the arrow points to Save Directory, press á Yes key Selecting Characters to Enter Names If you make a mistake while entering a nameNumber of times key is pressed Keys For example, to enter Tom Jones To search for a name by initial Finding Items in the Directory Dialling from the Directory Index tableKeys Index Editing an Item in the Directory Erasing an Item from the Directory Directory item you want to erasePress Ö or Ñ to select Clear Handset Press Intercom to answer IntercomPaging the base unit from the handset Paging the handset from the base unit Handset locator During an intercom call Transferring a Call Using the IntercomFrom the handset to the base unit From the base unit to the handset Special Features How to Use the Pause ButtonFor Analog PBX Line/Long Distance Service Users Recall Button Automatic Security Code SettingFor Call Waiting Service Users in New Zealand Call Waiting and Caller ID Compatible Selecting the recall time Points to Set recallDesired time is displayed Press ANSWER!ON to turn on the answering system Setting the Unit to Answer CallsAutomatic Answering Operation Monitoring incoming calls Press and hold NEW!MESSAGE until playback starts Listening to MessagesListening to only new messages Listening to all recorded messages During playback From the Handset Within 5 seconds, press Erase Erasing MessagesErasing a speciﬁc message Erasing all messages Make sure that the unit is in the standby mode initially Pager CallStoring a Pager Number To turn off the pager call mode, repeat steps 1 through Setting the Unit to Call a PagerTo conﬁrm the stored pager number To erase the stored pager number Summary of remote operation Remote Operation from a Touch Tone Phone Number Setting the Remote CodeEnter a remote code using a 2-digit To check the remote code Shaded boxes are voice prompts Voice Menu Erasing All Messages All Message PlaybackNew Message Playback Recording a Memo Message Direct Remote Operation Direct commands Skipping the greeting message Turning on the answering system To end remote operation, press RECALL/PLAYBACK Enter the desired direct commands pRemote Operation with the Handset Voice menu Voice menu will start p Each time you press 3, the mode willBase unit, and the mode will not turn on During playback You can also press Ü to repeat a Message Adaptor, then push it in the direction of the arrow Wall MountingTuck the telephone line cord Inside the wall mounting Wall Template To charge the handset battery Close the cover. Make sure you charge Battery ReplacementNew battery for about 10 hours Order to display the battery strength prompt correctly p Adding Another Phone Before Requesting Help Cordless Telephone ProblemRemedy Digits long, the number will not be Before Requesting Help Answering System ProblemRemedy During playback, the unit starts to ring and stops playback General ProblemRemedy For New Zealand Customers Problem Remedy Placement Safety InstructionsSafety Installations Environment For New Zealand Users Only Safety Instructions Instructions to customer Installation PQQX13218ZA-BM SM0901SA0 Service difficulties