Displays
Both the handset and the base unit show you information and instructions on their displays. These display prompts are shown below.
Handset display
No items stored
Recharge
12 new calls
10 new calls
G=New F=Old
The Caller List is empty or there are no stored items in the directory. This is displayed while the handset is on the base unit.
The battery needs to be charged. Place the handset on the base unit to charge the battery (p. 15).
The display shows the number of new calls and the battery strength while the handset is on the base unit.
When lifting the handset off the base unit, the display shows the number of new calls for 10 seconds.
To search from the most recent call, press Ö. To search from the oldest call, press Ñ (p. 36).
Preparation
Ringer off
10002223333
12:00A 1.1 0000 H=Set clock
When the handset ringer volume is set to OFF (p. 21), “Ringer off” will flash for about 45 seconds before the handset returns to the standby mode (p. 15).
When a call is received, the display shows the caller’s phone number after the first ring.
The clock needs adjusting (p. 16).
9