Panasonic KX-TC1230NZW, KX-TC1230ALW While the arrow points to Save, Directory, press á Yes key

1	Press (FUNCTION/EDIT).
2	While the arrow points to “Save
	directory”, press á (Yes key).
	•The display shows the number of stored items
	in the directory.
3	Enter a name, up to 15 characters using
	the dialling buttons (p. 46).
	•To move the cursor, press (*) (←) or (#) (→).
	•If a name is not required, press á (Next key)
	and go to step 5.
4	Press á (Next key).
5	Enter a phone number, up to 22 digits.
	•If you misdial, press Ü. Digits are erased
	from the right.
6	Press á (Save key).
	•A beep sounds.

•To continue storing other items, repeat from step 2.

•To return to the standby mode, press (EXIT/CH).

HSave directory Ringer volume

GF H=Yes

Directory= 20 items

Enter name

#=←→ H=Next

Enter name Tom Jones

#=←→ H=Next

Enter phone no.

03987654321

H=Save

Tom Jones 0987654321

Cordless Telephone

•If a pause is required for dialling, (REDIAL/PAUSE) can be stored in a phone

number in step 5. This counts as one digit (p. 54).

•You can exit the programming mode any time by pressing (EXIT/CH).

•If the display shows “Memory is full” in step 2, press (EXIT/CH). To erase other stored items from the directory, see page 51.

•After the maximum of 30 items has been stored, “Memory is full” is also displayed.

For New Zealand Users:

Your telephone service provider may charge you for a local call when it is dialled with an area code prefix. If the charge for local call is unacceptable, only the 7-digits of the local number should be dialled from your telephone. Do not dial the “0” prefix or the area code digit.

45