Selecting the Number of Rings
You can select the number of times the unit rings before the answering system answers a call, from “2” to “7” or “AUTO (Toll saver*)”.
Your phone comes from the factory set to “AUTO”.
Preparation
1 | Press (FUNCTION/EDIT). |
2 | Press Ö or Ñ repeatedly until the arrow |
points to “Program”. | |
3 | Press á (Yes key). |
4 | Press Ö or Ñ repeatedly until the arrow |
points to “TAD program”. | |
5 | Press á (Yes key). |
•“P” is displayed on the base unit. |
HSave directory Ringer volume
GF H=Yes
HProgram
GF H=Yes
HLCD contrast Set recall
GF H=Yes
HTAD program
GF H=Yes
Answering system setting
6 | Press (2). |
•The current setting is displayed on the base unit. | |
| 0: Selects “AUTO”. “A” is displayed on the base unit. |
| |
7 | Press (0), or (2) to (4) to set the number of rings. |
•The setting is displayed on the base unit. | |
8 | Press á (Save key). |
•A beep sounds. |
•To return to the standby mode, press (EXIT/CH).
*Toll saver (when set to “AUTO”)
When you call the unit from a touch tone telephone:
If the unit answers on the 2nd ring, there is at least one new message. If the unit answers on the 4th ring, there are no new messages. Hang up when you hear the 3rd ring. This will save you the toll charge for the call.
27