Operating Instructions And Parts Manual
Instructions d’Utilisation et Manuel de PiècesCDUCAP Series Manual de Instrucciones de Operación y Piezas
Notes / Notas
Operating Instruction and Parts Manual | CDUCAP Series |
|
|
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
Submersible
Sump Pump
Description
The submersible pump is designed for indoor home sump applications. The unit is equipped with a
This sump pump is provided with Switch Genius™ Technology to control the water level. When water is detected, the pump will start automatically.
Unpacking
Inspect this unit before it is used. Occasionally, products are damaged during shipment. If the pump or components are damaged, return the unit to the place of purchase for
Caution indicates a potentially
hazardous situation which, if not avoided, may result in minor or moderate injury.
Notice indicates important
information, that if not followed, may cause damage to equipment.
General Safety
Information
CALIFORNIA PROPOSITION 65This product or its power cord may
contain chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
|
| Discharge |
|
| Pipe |
11 inch | GFCI | |
Protected | ||
Diameter | Outlet | |
Minimum |
| |
Incoming |
| |
Water |
| |
Inlet Pipe |
| |
|
|
|
|
| On @ 8 |
|
| inches |
13 inch min. |
|
|
Check | Switch | |
Valve |
| |
|
| Off @ |
|
| approx. |
|
| 3 inches |
Figure 1 - Typical Installation
replacement. Failure to do so could result in serious injury or death.
Important Safety I n s t ru c t i o n s
READ AND FOLLOW ALLI N S T R U C T I O N S .
Safety Guidelines
This manual contains information that is very important to know and understand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols:
Danger indicates an imminently
hazardous situation which, if not avoided, will result in death or serious injury.
Warning indicates a potentially
hazardous situation which, if not avoided, could result in death or serious injury.
S p e c i f i c a t i o n s
Power supply requirements | 120V, 60 hz |
Motor | Single phase, oil filled |
Horsepower/Amp Ratings | 1/3 HP/9.5 A (CDUCAP725) |
| 1/2 HP/10 A (CDUCAP850) |
| 3/4 HP/10 A (CDUCAP995) |
| 1 HP/10 A (CDUCAP1000) |
Liquid temperature range | 40°F to 120°F |
Circuit requirements | 15 amps (min) |
Dimensions | |
8 inch | |
Approx. 3inch |
Construction
Motor housing | Cold rolled steel, Stainless steel (CDUCAP995) |
Volute | Cast iron |
Impeller | Glass reinforced thermoplastic |
Shaft | Low carbon steel |
Seals | Buna N |
Discharge | |
Motor Cover | Glass reinforced thermoplastic |
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
© 2008 Wayne Water Systems | For parts, product & service information |
visit www.waynepumps.com