Chapter 2 Avaya P330-ML Layer 2 CLI Commands

set ppp baud-rate

User level: privileged, supervisor.

Defines the baud rate used in PPP sessions.

The peer baud rate must be set at the same value as the host.

The syntax for this command is:

set ppp baud-rate <96001920038400>

Example:

P330-N#set ppp baud-rate 38400 ppp baud rate was set to 38400

set ppp chap-secret

User level: supervisor

Use the set ppp chap-secretcommand to configure the “shared secret” used in PPP sessions with CHAP authentication. The chap-secret is not transferable via the configuration upload/download mechanism.

The syntax for this command is:

set ppp chap-secret <chap-secret>

chap-secret

The shared secret, 4 to 32 characters.

Example:

P330-1(super)#set ppp chap secret hush

PPP shared secret for CHAP authentication is set

set ppp incoming timeout

User level: privileged, supervisor.

Use the set ppp incoming timeout command to set the number of minutes until the system automatically disconnects an idle PPP incoming session.

The syntax for this command is:

set ppp incoming timeout <time>

time

The timeout in minutes

Avaya P330-ML Reference Guide

107

Page 121
Image 121
Avaya P330-ML-ML manual Set ppp baud-rate, P330-N#set ppp baud-rate 38400 ppp baud rate was set to, Set ppp chap-secret