
Chapter 3 Avaya
Interface Context
You can only access these commands in the “interface” context.
Type interface [name] at the command prompt to enter the “interface” context if necessary.
default-metric
User level: privileged, supervisor.
Use the default metric command to set the interface RIP route metric.
Use the no default metric command to restore the default value.
The default metric is 1.
The syntax for this command is:
[no]
number | The interface RIP route metric value. The range is 1 to 15. |
Example:
Done!
enable vlan commands
User level: privileged, supervisor.
Use the enable vlan commands command before configuring
The syntax for this command is:
enable vlan commands
Example:
274 | Avaya |