Avaya P330-ML-ML manual Set system name, Router-Nsuper#set system name P330-ML-1

Chapter 3 Avaya P330-ML Layer 3 CLI Commands

set system name

User level: privileged, supervisor.

Use the set system name command to set the mib2 system name MIB variable.

The syntax for this command is:

set system name [string]

string	•	The system name string should be typed inside inverted
		commas.
	•	The name is cleared if you leave this field blank.
Example:

Router-N(super)#set system name P330-ML-1

Done!

If you wish to enter a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.

246 Avaya P330-ML Reference Guide