Avaya P330-ML-ML manual P330-N#set port level 3/1, Set port mirror

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

port	Number of the port on the module.
	You can also specify a range of ports separated by a dash, for
	example, 4/5-13 for ports 5 to 13 on switch 4.
value	Priority level (0-7)
Example:

P330-N#set port level 3/1 5

Port 3/1 level set to 5

set port mirror

User level: privileged, supervisor.

Use the set port mirror command to define a port mirroring pair in the stack.

Note: Ensure that the VLAN binding parameters are identical on the source and destination ports.

The syntax for this command is:

set port mirror source-port <module/port> mirror-port <module/port> sampling <activate> direction <direction>

module	Number of the switch.
port	Number of the port on the switch.
activate	always - keyword to activate the port mirroring entry
direction	rx - keyword to copy only incoming traffic
	both - keyword to copy both incoming and outgoing traffic
Example:

P330-N#set port mirror source-port 3/9 mirror-port 4/10

sampling always direction both

Mirroring both Rx and Tx packets from port 3/9 to port 4/10 is enabled

94 Avaya P330-ML Reference Guide