Chapter 2 Avaya P330-ML Layer 2 CLI Commands
set welcome message
User level: privileged, supervisor.
Use the set welcome message command to set a welcome message to appear after a reboot or after opening a new session (see session command) in the stack.
The syntax for this command is:
set welcome message [string]
string | string - The string to be used as the welcome message. |
| blank - Restores the default string. |
Example: |
|
P330-N# set welcome message avaya
The new welcome string is “avaya”
If you wish to define a string which includes spaces, you must enclose the entire string in quotation marks, e.g. "new york".
Avaya | 127 |
