Hitachi CP-X960WA/970W user manual Command data chart

Connection to the control signal terminal (continued)

				Command data chart
Item							Data code
MOUSE	00h=disable mouse function, 01 ∼ 7Fh=start mouse function
COMMUNICATE	0Xh=8N1, 1Xh=7N1
	X0h=1200bps, X1h=2400bps, X2h=4800bps, X3h=9600bps, X4h=19200bps
POWER	3Eh=power off (standby status), 3Fh=power on
ZOOM	01 ∼ 3Fh=Zoom +, 41 ∼ 7Fh=Zoom –
FOCUS	01 ∼ 3Fh=Focus +, 41 ∼ 7Fh=Focus –
MIRROR	00h=Normal, 01h=H : Invert, 02h=V : Invert, 03h=H & V : Invert
INPUT	11h=VIDEO, 21h=RGB1, 22h=RGB2
SYSTEM (VIDEO)	00h	00h=Auto, 00h 01h=NTSC, 00h 04h=NTSC4. 43
	00h	02h=PAL, 00h 03h=SECAM, 00h 05h=M-PAL, 00h 06h=N-PAL
VOLUME	00h	(low volume) ∼ 24h (high volume)
MUTE	00h=mute off,			01h=mute on
BRIGHT	00h	00h	00h	(dark) ∼ 00h	00h	24h (bright)
CONTRAST	00h	00h	00h	(low) ∼ 00h	00h	24h (strong)
COLOR	00h	00h	00h	(pale) ∼ 00h	00h	24h (dense)
TINT	00h	00h	00h	(reddish) ∼ 00h 00h 24h (greenish)
SHARPNESS	00h	00h	00h	(soft) ∼ 00h	00h	24h (sharp)
H.PHASE	00h	00h	00h	∼ 00h 00h	24h
H.POSIT	00h	00h	00h	01h (Right) moves one step
	00h	00h	00h	7Fh (Left) moves one step
H.SIZE	00h	00h	00h	01h (Large) moves two step
	00h	00h	00h	7Fh (Small) moves two step
V.POSIT	00h	00h	00h	01h (Up) moves one step
	00h	00h	00h	7Fh (Down) moves one step
COLOR BALANCE R	00h	00h	00h	(Light red) ∼ 00h		00h	24h (Dark red)
COLOR BALANCE B	00h	00h	00h	(Light blue) ∼ 00h		00h	24h (Dark blue)
AUTO ADJUST	00h	(AUTO ADJUST (Play))
BLANK	0Xh=blanking off, 1Xh=blanking on
	X=8 Black, X=9 Blue, X=F White
MAGNIFY	00h=normal display, 01h=zoom Magnify display or Magnify ratio up.
	7Fh=zoom ratio down
FREEZE	00h=normal display, 01h=still image display

The command code configuration consists of a 2-byte command and the following data.

•The first byte of a command indicates the command type with 3 bits on the MSB side and the data length with 4 bits on the LSB side.

Projector - computer	Computer - projector
‘0xH’ : Error code	‘2xH’ : inquiry code
‘1xH’ : response code	‘3xH’ : setting code
‘70H’ : frame error code	‘4xH’ : default setting code

‘x’ indicates the data length (example: x=2 means a 2-byte command).

• The second byte of a command indicates the command contents.

29