Chapter 3 Avaya P330-ML Layer 3 CLI Commands

ip rip authentication mode

User level: privileged, supervisor.

Use the ip rip authentication command to specify the type of authentication used in RIP Version 2 packets.

Use the no ip rip authentication command to restore the default value of none.

The syntax for this command is: [no] ip rip authentication mode

[simplenone]

simplenone

The authentication type used in RIP Version 2 packets:

 

simple - clear text authentication.

 

none - no authentication.

Example:

To specify simple authentication to be used in RIP Version 2 packets on the interface “marketing”.

Router-N(configure-if:marketing) # ip rip authentication

mode simple

ip rip default-route-mode

User level: privileged, supervisor.

Use the ip rip default-route-modecommand to enable learning of the default route received by the RIP protocol. The default state is talk-listen.

Use the no ip rip default-route-modecommand to disable learning of the default route.

The syntax for this command is:

ip rip default-route-mode <mode>

The possible default route modes on an interface are:

talk-listen

Set RIP to send and receive default route updates on

 

the interface.

talk-only

Set RIP to send but not receive default route updates

 

on the interface.

282

Avaya P330-ML Reference Guide

Page 298
Image 298
Avaya P330-ML-ML manual Ip rip authentication mode, Mode simple, Ip rip default-route-mode