Chapter 2 Avaya P330-ML Layer 2 CLI Commands
The syntax for this command is:
set port spantree
module/ Port identifier port
Example:
P330-N>set port spantree force-protocol-migration 1/1
port 1/1 is forced to send a Rapid spanning tree BPDU
set port spantree priority
User level: privileged, supervisor.
Use the set port spantree command to set the Spanning Tree priority level of a port. This value defines the priority of a port to be blocked in case two ports with the same costs cause a loop.
The syntax for this command is:
set port spantree priority [module/port] [value]
module/port | Module number/port number. |
value | Number representing the priority of the bridge. The |
| priority level is from 0 to 240, with 0 indicating high |
| priority and 240 indicating low priority. Value should be |
| in steps of 16; default value is 128. |
Example: |
|
P330-N# set port spantree priority 3/4 128
port 3/4 spantree priority is 128
Priority value 0 will set the port to Root port.
set port speed
User level: privileged, supervisor.
Use the set port speed command to configure the speed of a port or range of
In
102 | Avaya |
