Avaya P330-ML-ML manual Source-list Integer 100 Destination-list Example

Chapter 3 Avaya P330-ML Layer 3 CLI Commands

Example:

Router-N#ip access-list-cookie 101 12345

ip access-list-copy

User level: privileged, supervisor.

Use the ip access-list-copycommand to copy a configured source policy list to a destination policy list.

The syntax for this command is:

ip access-list-copy <source-list> <destination-list>

source-list	integer (100 - 149)
destination-list	integer (100 - 149)
Example:

Router-N#ip access-list-copy 100 101

ip access-list-dscp operation

User level: privileged, supervisor.

Use the ip access-list-dscp operation command to set a DSCP to CoS mapping.

On the P334T-ML, the system performs the mapping for only those frames than match an ACL rule with a “permit” action.

The syntax for this command is:

ip access-list-dscp operation <policy-list-number> <dscp> <action>

policy-	A valid id number for a policy list currently defined for the module
list-	(100 - 149)
number
dscp	Range of dscp. For example:
	<dscp-range> : [0 - 63] <low-dscp>-<high-dscp> <low-dscp>-<low-
	dscp>: apply the map to all packets with DSCP from <low-dscp> to
	<high-dscp>.

230 Avaya P330-ML Reference Guide