Chapter 2 Avaya P330-ML Layer 2 CLI Commands
show logging session condition
User level: user, privileged, supervisor
Use the show logging session condition command to display the condition and filtering of logging in the current CLI session.
The syntax for this command is:
show logging session condition
Example:
P330-N>show logging session condition
*********************************************************
Message logging configuration of SESSION sink ***
Sink Is Enabled
Sink default severity: Error
Facility! Severity Override
SUPPLY! Warning Session source ip: 135.64.102.224
show logout
User level: user, privileged, supervisor
Use the show logout command to display the amount of time the CLI remains idle before timing out in minutes.
If the result is 0, there is no timeout limit. The default is 15 minutes.
The syntax for this command is:
show logout
Example:
P330-N>show logout
CLI timeout is 10 minutes
show mac-aging
User level: user, privileged, supervisor
This command is available on
Avaya | 155 |
