Avaya P330-ML-ML P330-N#set spantree enable, Set spantree forward-delay, Set spantree hello-time

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

The syntax for this command is:

set spantree enable

Example:

P330-N#set spantree enable

bridge spanning tree enabled.

set spantree forward-delay

User level: privileged, supervisor.

Use the set spantree forward-delaycommand to set the bridge forward delay time parameter.

The syntax for this command is:

set spantree forward-delay <time>

forward - The time that is used when transferring the port to forwarding state.

delay Value range is 4-30 and must exceed (Bridge Max Age/2). Recomended value is 15 seconds.

Example:

P330-N#set spantree forward-delay 15 bridge forward delay set to 15.

set spantree hello-time

User level: privileged, supervisor.

Use the set spantree hello-timecommand to set the bridge hello time parameter.

The syntax for this command is:

set spantree hello-time <time>

hello- The time interval (in seconds) between the generation of

time configuration BPDUs by the Root. Value ranges between 1 to 10 and must not exceed (Bridge-Max-Age/2) - 1.

The recommended value is 2 sec.

Example:

P330-N#set spantree hello-time 2

bridge hello time set to 2.

118 Avaya P330-ML Reference Guide