Avaya P330-ML-ML Ip access-list-dscp trust, Router-N# ip access-list-dscp trust 100 trust-dscp

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

action	permit deny deny-and-notify fwd0 fwd1... fwd7:
	• permit: do nothing, let the packet pass
	• deny: drop the packet
	• deny-and-notify: drop the packet and send an SNMP trap
	• fwd0, fwd1...fwd7: set the frame COS field to 0...7
Example:

Router-N#ip access-list-dscp operation 101 0-63 permit

Router-N#ip access-list-dscp operation 101 62 fwd5

ip access-list-dscp trust

User level: supervisor

This command applies to the P334T-ML only when it is in device mode "Layer2".

Use the ip access-list-dscp trust command to decide which original frame priority to trust for the placement of the frame in the internal priority queues.

The syntax for this command is:

ip access-list-dscp trust <policy-list-number> {untrustedtrust-cos trust-dscp }

policy-list-	A valid id number for a policy list currently defined for the module
number	(100...149)
untrusted	Forward the packet with priority 0
trust-cos	Forward the packet with its original 802.1p priority (default)
trust-dscp	Forward the packet with the maximum priority between 802.1p and
	the priority obtained from the DSCP-CoS mapping table
Example:
Router-N#ip access-list-dscp trust 100 trust-dscp
Done!

40 Avaya P330-ML Reference Guide