Chapter 3 Avaya
show upload status
User level: user, privileged, supervisor
Use the show upload status commands to display the status of the current configuration file copy process from the device.
The syntax for this command is:
show upload status [<mod_num>]
mod_num | Number of the module. If you do not specify a number, upload |
(Optional) | statuses for all modules in the stack are shown. |
Example: |
|
Router-N> show upload status 1
Module | : 1 |
Source file | : |
Destination file : c:\conf.cfg | |
Host | : 149.49.36.200 |
Running state | : Executing |
Failure display | : (null) |
Last warning | : |
show vlan
User level: user, privileged, supervisor
Use the show vlan command to display router Layer 3 interfaces.
The syntax for this command is:
show vlan Example:
| ||
VLAN NAME | VLAN ID | VLAN MAC |
Default | 1 | 02:e0:3b:1d:f9:01 |
|
|
|
terminal
User level: user, privileged, supervisor
Use the terminal width and terminal length commands to set the width
and length of the terminal display in characters.
Avaya | 271 |
