Chapter 2 Avaya P330-ML Layer 2 CLI Commands
set ip route
User level: privileged, supervisor.
Use the set ip route command to add a route to the IP routing table. You can configure from 1 to 10 default static gateways for a
The syntax for this command is:
set ip route <destination> <gateway>
destination | IP address of the network, or specific host to be added |
gateway | IP address of the router |
Example:
This example shows how to add a default route to the IP routing table:
ROUTE NET TABLE |
|
|
|
destination | gateway | flags Refcnt Use | Interface |
0.0.0.0 | 192.168.1.1 | 1 | 1 | 3199 | se0 |
127.1.1.0 | 127.1.1.1 | 1 | 8 | 7606 | se1 |
ROUTE HOST TABLE |
|
|
|
destination | gateway | flags Refcnt Use | Interface |
127.0.0.1 | 127.0.0.1 | 5 | 2 | 131 | lo0 |
10.10.10.10 | 192.168.1.1 | 7 | 0 | 0 | se0 |
set license
User level: privileged, supervisor.
Use the set license command to activate the SMON and Routing capabilities of the Avaya
For a full description of the SMON or Routing License and the installation procedure please refer to the Installation Guide provided with the SMON/Routing License.
72 | Avaya |
