Chapter 2 Avaya P330-ML Layer 2 CLI Commands
show port auto-negotiation-flowcontrol-advertisement
User level: privileged, supervisor.
Use the show port
The syntax for this command is:
set
mod_num | Number of the switch |
(optional) |
|
port_num | Number of the port |
(optional) |
|
Example: |
|
P330-N>show port auto-negotiation-flowcontrol- advertisement
Port 1/1 advertises no flow control capabilities.
Port 1/2 advertises no flow control capabilities.
Port 1/3 advertises no flow control capabilities.
show port channel
User level: user, privileged, supervisor
Use the show port channel command to display Link Aggregation Group (LAG) information for a specific switch or port.
The syntax for this command is:
show port channel [<mod_num>[/<port_num>]] [info]
mod_num | Number of the switch. If you do not specify a number, the |
(Optional) | modules on all the switches are shown. |
port_num | Number of the port on the switch. If you do not specify a |
(Optional) | number, all the ports on the switch are shown. |
| You can also specify a range of ports separated by a dash, for |
| example, |
info (Optional) | Display port information |
Avaya | 159 |
