Avaya P330-ML-ML manual Set dot1x system-auth-control enable, Set dot1x tx-period

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

set dot1x system-auth-control enable

User level: supervisor

Use the set dot1x system-auth-control enable command to globally enable the PBNAC (802.1x) feature.

The syntax for this command is:

set dot1x system-auth-control enable

Examples:

•When a RADIUS server is defined:

P330-1(super)#set dot1x system-auth-control enable

dot1x system-auth-control enabled

•When a RADIUS server is not defined:

P330-1(super)#set dot1x system-auth-control enable

***Warning : Authentication server ( RADIUS ) is disabled/not-exist and so,

***no authentication can be made

dot1x system-auth-control enabled

set dot1x tx-period

User level: supervisor

Use the set dot1x tx-periodcommand to set the time interval between attempts to access the Authenticated Station.

The syntax for this command is:

set dot1x tx-period <Seconds>

Seconds Number of seconds – 0 to 65535

Avaya P330-ML Reference Guide 65