Loading Documents on the Flatbed
5 Close the document cover gently.
• If the document cover is slammed, the document will move and may not be scanned properly.
• Do not open or press down on the document cover during scanning.
• Do not look directly at the light. (You may damage your eyes.)
• Be sure to close the document cover before use.
• After scanning, open the document cover and remove the document.
ºWhen scanning with the flatbed repeatedly
The ADF is heavy so when scanning with the flatbed repeatedly, separate the ADF and document cover.
1 | Pull the exit document stopper towards |
you, pull the front door release under |
the hopper, separate the ADF and document cover, and lift up the ADF to open.
2 Perform operation steps 1 through 5 for scanning with the flatbed one time. (See pages 37 and 38.)
ADF
Hopper
Front door release
ADF 
Front door release (Inside the front door.)
Document cover
Exit document stopper
38
