Replacing Consumable Roller Modules
14
15
Close the conveyor by pushing it into the unit.
•When the conveyor is closed, the click- stop mechanism will operate.
•If the conveyor is not closed correctly and the operation in step 15 is done, the conveyor may break.
Close the ADF door.
•Push both sides of the ADF door down gently until it clicks into place.
•Since the roller are located on the left side of the ADF door, there is more weight on the left side.
Therefore, it is important to note that the door needs to have tension evenly divided to close it properly.
•After replacing roller modules, clear the “Replace Roll. Warning” display.
(Refer to page 31.)
Conveyor
Before closing the ADF door, confirm that the conveyor is closed correctly. If it is not, the conveyor may break.
Conveyor
57
