Cleaning the Unit
7 Close the ADF door.
• Push both sides of the ADF door down gently until it clicks into place.
• Since the roller are located on the left side of the ADF door, there is more weight on the left side.
Therefore, it is important to note that the door needs to have tension evenly divided to close it properly.
ºCleaning the scanning section glass, CIS glass, sensor plate, sensor roller, document sensors, double feed detection sensors and paper detection sensor
1 Turn the power off.
2 Using your hand, pull the ADF door release towards you, then open the ADF door completely.
ADF door
ADF door release
ADF door
ADF door release (Inside the ADF door.)
47
