Panasonic KV-S6055WU, KV-S6050WU Cleaning the Unit, ºOutside of the scanner, ºInside the scanner

Cleaning the Unit

ºOutside of the scanner

Clean the unit at least once a month.

1	Turn the power off.
2	Clean the cover with a soft cloth.
	• The ADF insertion and exit slots get dirty
	easily, therefore, proper cleaning is
	required.
3	Remove dirt and dust from the fan
	exhaust vent with a brush.

Power switch

²: Off position

ºInside the scanner

Clean the unit described below at least once a week or when 50,000 sheets have been scanned, whichever comes first.

•Clean the rollers, all document sensors, double feed detection sensors and paper detection sensor if paper jamming or double feeding occurs frequently.

•Clean the scanning section glass, CIS glass, sensor plate and sensor roller when black or white lines appear on the scanned images. NOTE : There is no CIS glass and no sensor roller for the KV-S6050W / KV-S6050WU.

•If the documents that will be scanned are dirty, then the scanner parts may become dirty as well. To maintain proper scanning, clean the scanner parts frequently.

•When scanning with the flatbed and black dots or white patches occur, open the document cover, and clean the document glass and cover sheet (black sheet) using the accessory roller cleaning paper.

ºCleaning the rollers

1 Turn the power off.

2 Using your hand, pull the ADF door release towards you, then open the ADF door completely.

ADF door

ADF door

ADF door release

ADF door release (Inside the ADF door.)

44