Replacing Consumable Roller Modules
8 | Tilt the paper feed conveyor at a slight |
angle pointing downward and attach it |
as shown in the diagram to the right.
Hook
Pin
Please attach the left side hook in the same way.
9 Close the paper feed conveyor.
• Push up the paper feed conveyor until it clicks into place.
• You are now finished attaching the paper feed roller module and separation roller module.
To continue, replace the retard roller module according to the following procedure. (The retard roller module is located in the conveyor.)
10 Using your fingers, hold the conveyor and pull it towards you to open it.
•When the conveyor is pulled towards you, the
Paper feed conveyor
Retard roller module
Document guide
Conveyor
55
