Storing stations in memory
You can use one of the following methods to store broadcasting stations in memory.
•Automatic preset: SSM
•Manual preset
•Storing your favorite station into the EX button
Automatic preset: SSM
You can preset up to 6 local stations in each FM band (FM1, FM2, and FM3).
1 Select the band (FM1, FM2, or FM3).
FM1
FM2
FM3 
AM
2 Press MODE repeatedly until “SSM” appears.
3 Press SEL.
Manual preset |
| |
ENGLISH | ||
EXAMPLE: Storing an FM station of 88.3 MHz | ||
You can preset up to 6 stations in each band |
| |
(FM1, FM2, FM3, and AM) manually. |
| |
into the preset channel number 1 of |
| |
| ||
the FM1 band |
|
1 Select the FM1 band.
2 Tune in to a station (in this example, of 88.3 MHz).
Press ¢ 
to tune in to stations of higher frequencies.
Press 4 
to tune in to stations of lower frequencies.
3 Press and hold the number button (in this example, 1) for more than 2 seconds.
|
|
|
| “P1” flashes for a few seconds. | |
|
|
|
| ||
4 Repeat the above procedure to store | |||||
automatic preset is over. | |||||
Local stations with the strongest signals are | other stations into other preset | ||||
searched for and stored automatically in the band | numbers. | ||||
you have selected (FM1, FM2, and FM3). These |
| ||||
stations are preset in the number buttons — No. |
| ||||
1 (lowest frequency) to No. 6 (highest frequency). |
| ||||
When automatic preset is over, the station stored |
| ||||
in the number 1 button will be automatically tuned |
| ||||
in. |
| ||||
9
