JVC LVT0995-001A, KW-XC838 Troubleshooting, Symptoms Causes, Remedies, General, Disc Playback

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service

center.

ENGLISH

40

General

FM/AM

Disc Playback

	Symptoms	Causes
•	Sound is sometimes	Connections are not good.
	interrupted.
•	Sound cannot be heard	The volume control is turned
	from the speakers.	to the minimum level.
		Connections are incorrect.
•	This unit does not work at	The built-in microcomputer
	all.	may function incorrectly due
		to noise, etc.
•	SSM automatic preset	Signals are too weak.
	does not work.
•	Static noise while listening	The antenna is not
	to the radio.	connected firmly.
•	Disc cannot be played	Disc is inserted upside
	back.	down.
•	Disc sound is sometimes	You are driving on rough
	interrupted.	roads.
		Disc is scratched.
		Connections are incorrect.
•	“NO DISC” appears on the	No disc is in the loading slot
	display.	(or in the magazine.)
		Disc is inserted incorrectly.
•	Disc can neither be played	The CD player may be
	back nor ejected.	functioning incorrectly.
•	“EJECT ERR” appears on	The disc was interrupted
	the display.	ejection or insertion.
•	CD-R/CD-RW cannot be	CD-R/CD-RW is not
	played back.	finalized.

•Tracks cannot be skipped on CD-R/CD-RW.

Remedies

Check the cords and connections.

Adjust it to the optimum level.

Check the cords and connections.

Press the reset button on the front panel (see page 2.)

Store stations manually.

Connect the antenna firmly.

Insert the disc correctly.

Stop disc play while driving on rough roads.

Change the disc.

Check the cords and connections.

Insert disc.

Insert it correctly.

Press and hold both the / ATT and CD 0 buttons at the same time

for several seconds.

Press CD 0, or press both

the / ATT and CD 0 buttons together to clear the message.

•Change to a finalized CD- R/CD-RW.

•Finalize the CD-R/CD-RW with the component which you used for recording.