34
ENGLISH
EXTERNAL COMPONENT OPERATIONS
You can connect two external components to this
unit.
Connect one to the auxiliary (AUX) input jack on
the control panel, and the other to the CD
changer jack on the rear.

Preparations:

•For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
•Before operating the external component connected
to the CD changer jack, select the external input
correctly. (See “Selecting the external component to
use – EXT INPUT” on page 32.)
1

Select the external component.

AUX INPUT: Press TAPE/AUX repeatedly to
select the component
connected to the AUX jack on
the control panel.
LINE INPUT: Press CD/CH repeatedly to
select the component
connected to the CD changer
jack.
•If “LINE INPUT” does not appear on the
display, see page 32 and select the external
input (“Selecting the external component to
use – EXT INPUT”).
MD player, etc.
2

Turn on the connected component

and start playing the source.

3

Adjust the volume.

If the input level of the external component
connected to the auxiliary (AUX) input jack
is not high enough, increase the input level
properly.
Without adjusting the input level, you may be
surprised at the loud sound when you change
the source from one external component to
another. (See “Adjusting the auxiliary input
level – AUX ADJ” on page 32.)
EN34-34KW-XC838[U] 02.12.17, 11:46 AM34