Resetting the system, Default system settings

Using other functions

The front panel display shows each of the following settings for two seconds each:

Input source	Listening mode

Signal select	Surround Back Processing

Video Select	MCACC Position

Room 2 / REC SEL	Room 3

2When you’re finished, press STATUS again to switch off the display.

Resetting the system

Use this procedure to reset all the receiver’s settings to the factory default. Use the front panel controls to do this.

1Switch the receiver into standby.

2While holding down the front panel AV

PARAMETER button, press and hold STANDBY/ON for about three seconds.

The display shows RESET?.

3Press the front panel ENTER button. The display shows RESET OK?.

4Press SETUP to confirm.

OK appears in the display to indicate that the receiver has been reset to the factory default settings.

•Note that all settings will be saved, even if the receiver is unplugged.

Default system settings

Setting		Default
HDMI Audio		Amp

Digital Video Conversion		On

Speakers		A

Surround Back System		Normal (SBch)

Speaker System	Front	SMALL

	Center	SMALL

	Surr.	SMALL

	SB	SMALLx2

	SW	YES

Crossover		80 Hz

Bass Peak Level		OFF

X-Curve		OFF

THX Audio Setting		0–1ft.

Inputs

See Input function default and possible settings on page 62.

Setting		Default
Multi Room

Room 2 Volume Type		Variable

Room 2 IR Receiver Type		SETTING 1

Room 2 Volume		-60

SR+

SR+ Control On/Off		OFF

SR+ Volume Control On/Off		OFF

Monitor Out		OFF

DSP

MCACC Position Memory		M1: MEMORY 1

Surround back channel		ON
Processing

Phase Control		On

Sound Delay		0 frame

Dual Mono		CH1

DRC		OFF

SACD Gain		0 dB

Digital Safety		OFF

Effect Level	7 ch Stereo	90

	Other modes	70

2PL II Music Options	Center Width	3

	Dimension	0

	Panorama	OFF

Neo:6 Options	Center Image	3

All Inputs	Listening Mode (2 ch)	AUTO SURROUND

	Listening Mode (x ch)	AUTO SURROUND

	Listening Mode (HP)	STEREO

See also Setting the AV options on page 64 for other default DSP settings.

MCACC

Channel level (M1–M6)		0 dB

Speaker Distance (M1–M6)		10 ft

Standing Wave	Standing Wave On/	ON
(M1–M6)	Off

	ATT	0 dB

	SWch Wide Trim	0.0

EQ Data (M1–M6)	All channels/bands	0 dB

EQ Wide Trim (M1–M6)		0.0 dB

VSX-72TXV, VSX-74TXVi-S, VSX-72TXV-S, VSX-74TXVI specifications

The Pioneer VSX-74TXVi and VSX-72TXV series are renowned for their exceptional sound quality and versatile features, making them a popular choice among audio enthusiasts and home theater aficionados. These models stand out for their advanced technologies and comprehensive functionalities, catering to both music and movie lovers.

The VSX-74TXVi is a high-performance receiver that supports a wide range of audio formats and provides impressive connectivity options. One of its main features is the incorporation of Dolby TrueHD and DTS-HD Master Audio decoding, allowing users to experience studio-quality sound. The model also supports multi-channel audio setups, making it ideal for immersive 7.1 surround sound environments. The Automatic MCACC (Multi-Channel Acoustic Calibration System) optimizes the sound based on the room's acoustic characteristics, enhancing the overall listening experience.

On the other hand, the VSX-72TXV-S offers many similar features but focuses on delivering high-definition audio and video. With support for HDMI inputs, it facilitates easy switching between multiple HD sources while maintaining top-notch audio quality. The inclusion of 1080p video upscaling allows users to enjoy standard-definition content in much higher resolutions, enhancing picture clarity for a better viewing experience.

Both models boast Zone 2 and Zone 3 capabilities, enabling audio distribution to different areas of a home, thus providing flexibility for playing music in various rooms. They also feature a user-friendly interface with an on-screen display, allowing users to navigate through options with ease.

In addition to robust audio performance, these Pioneers are designed with a focus on aesthetic appeal and durability. Their sleek designs make them an elegant addition to any entertainment setup. The VSX-74TXVi and VSX-72TXV also include built-in amplifier technologies, ensuring efficient power delivery and reliable performance over extended periods.

The VSX series exemplifies Pioneer's commitment to quality and innovation, providing features that enhance the home entertainment experience while ensuring compatibility with modern technologies. Overall, these models embody a combination of versatility, high fidelity, and user-friendly functionality, making them standout choices for any home theater system.

Pioneer VSX-72TXV-S manual Resetting the system, Default system settings, Display shows RESET?

Models: VSX-72TXV VSX-74TXVi-S VSX-72TXV-S VSX-74TXVI