Pioneer VSX-74TXVI, VSX-72TXV, VSX-74TXVi-S IPod messages, XM radio messages, Symptom Cause Action

12Additional information

Symptom	Remedy
Noisy or distorted picture.	• Sometimes a video deck may output a noisy video signal (during scanning, for example), or the video
	quality may just be poor (with some video game units, for example). The picture quality may also depend on
	the settings, etc. of your display device. Switch off the video converter and reconnect the source and display
	device using the same type of connection (component, S-video or composite), then start playback again.
	• If the problem still persists when connecting your HDMI component directly to your monitor, please
	consult the component or monitor manual or contact the manufacturer for support.

iPod messages

Symptom	Cause	Action
Error I1	There is a problem with the signal path from the	Switch off the receiver and reconnect the iPod to the receiver.
	iPod to the receiver.	If this doesn’t seem to work, try resetting your iPod.
Error I2	The software version being used with the iPod	Update the software being used with the iPod (software
	needs to be updated.	versions prior to iPod update 2004-10-20 are not supported).
No Track	There are no playable songs currently stored in	Input some music files compatible with iPod playback.
	the iPod.

XM radio messages

Symptom	Cause	Action
Check Antenna	The XM antenna is not connected.	Check that the XM antenna cable is attached securely.
XM ANT ERR	A short-circuit occurring in the antenna or	Make sure that there is nothing unusual with the antenna or
	surrounding antenna cable.	antenna cable. Switch the power off then back on again.
Updating	The radio is being updated with the latest	Wait until the encryption code has been updated. Channels
	encryption code.	00 and 01 should function normally.
No Signal	The XM signal is too weak at the current location.	n/a
Loading	The receiver is acquiring audio or program	Wait until the information has been received.
	information.
Off Air	The channel currently selected has stopped	Select another channel.
	broadcasting.
CH– – –	You have selected a channel that does not exist,	The receiver will automatically switch to channel 001 (or the
	or that you have not subscribed to.	last selected channel).
– – – – – – – –	There is no artist name/feature, song/program	No action needed.
	title, or channel category associated with the
	channel at this time.

Note

•If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to return to normal operating conditions.

80

En