3Com S200 manual PAD Prompt Entry Number, Remote PAD Parameters Number, Autocall Mnemonic

PAD Port Configuration

PAD Prompt Entry Number

Range:	0 to 8
Default:	0
Description:	Specifies the customized prompt from the PAD Prompt Table.
		This parameter is ignored when Terminal Control = PASS and the
		PAD Prompt Entry Number is taken from the NUI/Password Table
		entry.
Remote PAD Parameters Number
Range:	0 to 6
Default:	0
Description:	Specifies the Remote PAD Parameter Table entry number that is
		used by the remote PAD to update its X.3 characteristics when
		connected to this port.
			Note
		No updates will be sent if this parameter is set to zero (0).
Autocall Mnemonic
Range:	0 to 8 alphanumeric characters
Default:	N/A
Description:	The mnemonic name that is used when the port is configured for
		autocalling.

•A corresponding entry must be made in the Mnemonic Table.

•Use summing to combine several parameter values.

Autocall Timeout (sec)

Range:	5 to 255
Default:	10
Description:	Specifies the time (in seconds) between call attempts when
	autocalling.

Configuring PAD/ATPAD Ports 13