3Com S200 #117, EIA Signalling Action, #118, Message Assembly, #119, DCD to Data Timer Duration

PAD Profile Table Record

#117, EIA Signalling Action

Range:	0, 1
Default:	0
Description:	Specifies the EIA signalling action (when #114, PAD Mode = 1
		or 2).
			• 0: None
			• 1: Raise DCD before and after transmission.
			Note
		A change to this parameter only takes effect if you purchased the
		Transparent Polled Async option for this node.

#118, Message Assembly

Range:	0, 1
Default:	0
Description:	Allows the PAD to collect async messages from the network
		before sending to the attached device:
			• 0: Disabled
			• 1: Enabled
			Note
		A change to this parameter only takes effect if you purchased the
		Transparent Polled Async option for this node.

#119, DCD to Data Timer Duration

Range:	0 to 255
Default:	0 (disables this parameter)
Description:	Specifies the time, in milliseconds, that DCD is held high before
		data transmission to the attached device (when #117, EIA
		Signalling Action = 1).
			Note
		Entering zero (0) will disable this parameter.
			Note
		A change to this parameter only takes effect if you purchased the
		Transparent Polled Async option for this node.

Configuring PAD/ATPAD Ports 43